Take advantage of the new high C charge rate on the new Zippy, Turnigy, and Tunrigy Nano-Tech battery packs with the new Turnigy Mega 400W V2 charger. 

1. is a new and improved version of the original Mega 400W charger. 

The Turnigy Mega 400W V2 is a high power balancing charger/discharger which can handle up to 20A charge rates on 6S LiPo/LiFe and 18S NICD/NIMH accurately. Bundled with the Turnigy Mega 400W V2 is an array of charging wires and plugs, suitable for most applications.   

Features;
Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing charge & discharge
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
High-power and high-performance circuit
Store function, allows safe storage current
Data storage (Store up to 10 packs in memory)
Cyclic charging/discharging

Note: Temperature sensor not included.

Spec.
Input voltage: 11.0 – 18.0Volt
Charge current: 0.1 – 20.0A
Discharge current: 0.1 – 5.0A
Maximum charge capacity: 400W @ input voltage >15V
Maximum discharge capacity: 25W
Current drain for balancing Li-po: 200mAh/cell
Lithium (LiPo/LiIo/LiFe) battery cell count: 1 – 6 series
NiCd/NiMH battery cell count: 1 – 18 series
Pb battery voltage: 2 –24V
Battery setup memories: 10
Intelligent temperature control: Yes
Weight: 815g
Dimensions : 146x144x56mm

Including;
1 x Turnigy Mega 400W V2 charger
1 x JST XH Adapter
1 x Banana plug w/male XT60 
1 x Banana plug w/bare Leads  
1 x XT60 w/aligator clip
1 x XT60 w/female JST
1 x XT60 w/female Futaba
1 x Aligator clip for charger input leads

This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT,TURNIGYand any pack with a JST adapter.